Site Search:  

Packages for LEDs

Generally LEDs are mounted in the package that provides two electrical leads, a transparent optical window for the emission and heat-sinking. An LED chip is soldered/glued to the package surface that is connected to the one of the lead wires. Top contact of the chip is connected to the other lead with a bonding wire.

We offer a range of standard and customized TO- and SMD-type packages:

TO-18
Appropriate for mounting one-element LEDs, single-wavelength matrices, 2-wavelength matrices

TO-18 with cap
with glass window
Datasheet

TO-18 with cap
without window
Datasheet

TO-18 with parabolic reflector with quartz/sapphire window
Datasheet

TO-18 with parabolic reflector without window
Datasheet

 

TO5 (TO39)
Appropriate for mounting
one element LEDs or LED-matrices
  TO8
Appropriate for mounting multi-element LED-matrices

TO-5 with built-in TEM covered by cap with quartz/sapphire window
Datasheet

TO-5 with built-in TEM covered by parabolic reflector with quartz/sapphire window
Datasheet
 
TO-8 with built-in TEM covered by cap with quartz/sapphire window
Datasheet

 

SMD type packages

CS3 (SMD 3x3 mm)
Datasheet

CS5 (SMD 5x5 mm)
Datasheet

CS5R (SMD 5x5 mm with microreflector)
Datasheet

CS5R-3M (SMD 5x5 mm) (for mounting three-element LED matrices)
Datasheet