Site Search:  

Return to selector

Lock-In Amplifiers - Compact Modules

Series LIA-MV-150

  • Current and Voltage Input
  • Working Frequency up to 45 kHz
  • Adjustable Sensitivity, Time Constant and Phase
  • Local and Remote Control
  • Compact and EMI-Shielded Case

Compact amplifier module

In modern optoelectronic systems lock-in-amplification is one of the most useful techniques to get rid of unwanted noise and to improve the measurement sensitivity. Therefore we have created a miniaturized, powerful module operating reliably even in heavy noise environments.

Two Ways of Programming

The amplifier settings - e.g. phase, gain, time constant - are controlled either by switches directly on the amplifier module or externally using a standard digital I/O computer board. The variable working frequency is determined by an external reference signal which may be e.g. the synchronization signal of a chopper wheel or the modulation signal of a laser. The current input is well suited for amplifying signals from high impedance sources like photodiodes or PMTs while the voltage input can be used to measure signals from low impedance sources like pyros or coils.

Applications

Low Noise Input/Output Cable: CAB-LN1 Low Noise Cable
The LUCI-10 amplifier interface allows remote control of FEMTO amplifiers and photoreceivers with a remote control capability from a standard Windows PC with USB port.

 

Compact Lock-In Amplifier Modules Selector

  Click Part # to view pdf datasheet
Model LIA-MV-150-S
Standard
LIA-MV-150-D
True-Differential Input
Voltage Input BNC
Single-Ended Instrumentation-Amplifier
Noise 12 nV/
Hz
LEMO
True-Differential Instrumentation-Amplifier
Noise 12 nV/
Hz
Current Input BNC
Transimpedance-Amplifier
Gain 1 kV/A

Noise 13 pA/√Hz
LEMO
Transimpedance-Amplifier
Gain 1 kV/A

Noise 13 pA/√Hz
Sensitivity
(Full Scale)
Voltage: 3 μV to 100 mV, switchable in 1-3-10
Current: 3 nA to 100
μA, switchable in 1-3-10
Gain Accuracy + 2% for a Sinusoidal Input Signal
Working Frequency 10 Hz - 45 kHz
Reference Input BNC, + 100 mV to + 5 V, switchable to TTL
Phase Adjustable 0 - 360°
Demodulator 55 dB max. Dynamic Reserve, Square Wave Mixer
Time Constants 3 ms to 10 s, switchable in 1-3-10, Slope switchable 6 dB or 12 dB/Octave
Output BNC, X (in phase), + 10 V Full Scale, short-circuit protected
Control Interface 16 Opto-Isolated Digital Inputs, TTL/CMOS Compatible, 8 Bit Phase, 4 Bit Time Constant, 4 Bit Sensitivity
Interface Software Option LUCI-10 Control Interface Software and Hardware option
Power Supply + 15 V, +100 mA/V -60mA typ.
Case 170 x 60 x 30 mm (L x W x H), Weight 370 g (0.82 lbs)
LED overload and unlocked indication. Power supply via 3-pin LE MO socket. A mating connector is provided with the device. Optional power supply PS-15 is available. For further information please view the datasheet.

Block Diagram LIA-MV

FEMTO Product Catalog (pdf)

Return to selector