The electro-optic deflector makes an ideal Q-switch for compact, low average power systems. Polarizers are not required and the optical loss can be kept to below 1%.
The ability to deflect in a few nanoseconds allows short Q-switch pulses to be produced and high repetition rates obtained.
The 1 mm aperture deflector has been successfully used to Q-switch a micro-chip laser at 20kHz while producing 1.5 ns pulse lengths.
Leysop can supply the deflector with a miniaturized 1kV driver operating between 0 - 20 kHz. The Q-switch is not liquid filled and does not require accurate alignment.
|Deflection angle for 1kV drive||5mrad||3mrad||1.5mrad|
|Optical loss ar/ar at 1.06mm||< 1%||< 1%||< 1%|
|Dimensions (mm, excluding connections)||25 x 25 x 11||20 x 20 x 31||20 x 20 x 31|
|Switching Speed||Driver limited||Driver limited||Driver limited|
Solid State 20kHz Driver Specification
|Power Input||+9V or +12V @ 0.7A D.C.|
|Nominal Pulse Length||20 - 100ns, internally adjustable|
|Rise Time into 50pF Capacitor||<10ns|
|Trigger Input||2 - 5V with 10ns rise time into 50 Ω|
|Repetition Rate||0 - 20kHz|
|Dimensions||60 x 60 x 110mm|
|Connectors: Output & Trig. in||SMA|
|Cable length between Pulser and Deflector||500mm max.|
Email us regarding custom devices.