- High throughput in any part of Near & Mid InfraRed-spectrum
- ATR-tip shaped for immersion in liquid fl ow without dead zone
- Flexible and robust for industrial applications in harsh environment
- Compatible with all spectrometers and automated process-interfaces
FlexiSpec® product line from art photonics is the latest generation of Attenuated Total Reflection. Near & Mid IR-fiber ATR-Probes produced for any type of FT-NIR, FT-IR and other IR-spectrometers, photometers and IR-LED or QCL spectral sensors. ATR immersion fiber optic probes with patented design are suitable for reaction monitoring in lab, pilot plant and for full automated process control.
Applications:
- Reaction Monitoring in real time
- Process Analytical Technologies (PAT)
- Remote Polymerization Control
- Crystallization Process Screening
- In-situ IR-Spectroscopy for PAT in Chemical, Petrochemical, Atomic, Biopharmaceutical & Food Industry
Specification of Fiber Optic Immersion ATR- Probes FlexiSpec®
| Probe Type | Diamond ATR | ZnSe ATR | Silicon ATR | Cubic Zirconium ATR |
|---|---|---|---|---|
| Transmission | 5.2-17µm(600-1900cm1) | 3.2-17µm(600-3100cm -1) | 5.2-17µm(600- 3100cm-1) | 1.5-6.5µm(1550- 650cm1) |
| Fiber Type | PIR-900/1000 Silver Halide | PIR-900/1000 Silver Halide | PIR-900/1000 Silver Halide | CIR 500/550 Chalcogenide glass (As-S) |
| Temperature range | -100°C / + 140°C | -100°C / + 140°C | -100°C / +250°C | -100°C /+ 200°C |
| Pressure (max) | 200Bar (300 Bar) on request | 10Bar | 100 Bar | 100 Bar |
| Common Parameters of Fiber Optic ATR-Probes FlexiSpec® | ||||
| Total Length | 1.5m (opt.: 1m to 5m) Customized dimensions are available on request | |||
| Shaft Length | 300 mm (opt.: 100-700 mm) Customized dimensions are available on request | |||
| Shaft Diameter | 12mm, 6.3 mm (opt.: 3mm) | |||
| Shaft Material | Hastelloy C22 | |||
| Length of Legs | 500mm (opt.: 200mm to 500mm) | |||
| Protective Tube Material | Liquid Tight SS-Conduit, KOPEX-Tube | |||
| Minimal Bending Radius | 130mm | |||
| Input / Output Connectors | Long SMA (opt.: any other type) | |||
| Compatible Process-Interface | Ceramat-FOS or SensoGate-FOS Available for 12 mm shafts only | |||
Application Notes: Fiber Optic ATR-Probes
Fiber Optic ATR-Probes Summary Table