Mid-infrared light-emitting diodes and photodiodes manufactured by LED Microsensor NT, LLC have already found their usefulness in a vast area of applications. For the first-time users we announce sample systems and kits that enable fast preliminary experiments with mid-infrared LED-PD optopairs for different detection purposes.
The new line of devices includes evaluation systems for CO2 and CH4 (CDS-3 and MDS-3) for precise experiments with gases, evaluation kits that offer high flexibility and miniature on-board evaluation systems for CO2 and CH4 (CDS-4 and MDS-4).
Every system is an out-of-the-box solution and can be launched with minimal effort. Standard packaging arrangement:
- a light-emitting diode with a driver;
- a photodiode with a preamplifier;
- a synchronous detector;
- an optical chamber.
Mini Spectrometer
LMS-R LED Minispectrometer is the new ultra compact, lightweight instrument for spectral analysis in the near-infrared range 1.3 –2.4 μm. It enables very fast and simple measurement procedure of various samples: solids, liquids, powders. Datasheet
CDS-4/MDS-4 Miniature Sensor Modules for CO2 and CH4 Detection
CDS-4 Sensor Module for CO2
CDS-4 is a miniature evaluation kit for CO2 detection. It is a low-cost system with compact “on-board” design that includes a very compact optical cell and electronics for LED power supply and PD signal amplification.
MDS-4 Sensor Module for CH4
MDS-4 is a miniature evaluation kit for CH4 detection. It is a low-cost system with compact “on-board” design that includes a very compact optical cell and electronics for LED power supply and PD signal amplification. Datasheet
MDS-4BT Wireless Sensor Module for CH4
MDS-4BT is a miniature wireless sensing module for CH4 detection. It is a low-cost system with compact “on-board” design that includes a very compact optical cell and electronics for LED power supply and PD signal amplification. Datasheet
Evaluation Kits for CO2 and CH4 detection
CDK-c CO2 Detection kit
CDK-c is an advanced evaluation kit for CO2 detection with glass-covered LED and photodiode, which includes all the needed components for quick and simple start-up. A modular design allows for component changes creating a versatile working platform.
MDK-c CH4 Detection kit
MDK-c is an advanced evaluation kit for CH4 detection with glass-covered LED and photodiode, which includes all the needed components for quick and simple start-up. A modular design allows for component changes creating a versatile working platform. Datasheet
CDK CO2 Detection kit
CDK is an evaluation kit for CO2 detection, which includes all the needed components for quick and simple start-up. A modular design allows for component changes creating a versatile working platform.
MDK CH4 Detection kit
MDK is an evaluation kit for CH4 detection, which includes all the needed components for quick and simple start-up. A modular design allows for component changes creating a versatile working platform.
Evaluation Systems for CO2 and CH4 detection
CDS-5 CO2 Detection System
CDS-5 is an evaluation system for CO2 detection with a compact optical cell that incorporates an LED and a photodiode with a special glass covering. It includes all the needed circuitry for quick setup: LED driver, photodiode preamplifier, synchronous detector (NOTE: CDS-5 supersedes CDS-3). Datasheet
MDS-5 CH4 Detection System
MDS-5 is an evaluation system for CH4 detection with a compact optical cell that incorporates an LED and a photodiode with a special glass covering. It includes all the needed circuitry for quick setup: LED driver, photodiode preamplifier, synchronous detector (NOTE: MDS-5 supersedes MDS-3). Datasheet
CDS-3 CO2 Detection system (available under special request only)
CDS-3 is an evaluation system for CO2 detection. It includes a mid-infrared light emitting diode Lms43LED with LED driver, photodiode Lms43PD-03 with preamplifier and synchronous detector. CDS-3 has a three-pass gas chamber. It is a turnkey device which allows detecting presence of carbon dioxide in gas flow with precision.
MDS-3 CH4 Detection system (available under special request only)
MDS-3 is an evaluation system for CH4 detection. It includes a mid-infrared light emitting diode Lms34LED with LED driver, photodiode Lms36PD-03 with preamplifier and synchronous detector. MDS-3 has a three-pass gas chamber. It is a turnkey device which allows detecting presence of methane in gas flow with precision. Datasheet
